Model No.︰ED2000-169
Brand Name︰HXTC
Country of Origin︰China
Unit Price︰US $ 11 / pc
Minimum Order︰1 pc
169.8KHZ Power Cables Electronic Marker |Underground RFID Tags ED2000 have two models(ID or Non ID). It consists of a sealed shell containing a passive antenna - a low-frequency resonance circuit tuned to a certain frequency. The ID version integrates an ID chip. Depending on the resonant frequency and the color, the ED2000 are used to mark a wide range of underground facilities, such as telecommunication lines, power supply networks, cable television networks, water supply pipelines, wastewater networks, oil and gas pipelines, and so on.
1、APPLICATIONS
ED2000 can be installed at a certain interval, or at the turning of changing trend and at some event points, such as connection points, valves, well covers, T-shaped branches, etc. According to the project importance and project budget, the instralling density can vary from several meters to tens of meters, usually 10-20 meters.
· Pipeline path
· Nonmetallic pipe
· Various valves
· Metering meter
· Various crossing points
· Tee · Depth change
· Pressure reducing device
· Cathodic protection
· Pressure control point
· Embedded reserved port
· Various elbows
· Pipe diameter change
· Water well · Cover
· Maintenance point
……
2、FEATURES
2.1. Physical Characteristics
· Shell: ABS
· weight:220g±10%
· Case diameter - 8.4in (213mm)
· Case height - 1.2in (3.1cm)
· Melt index: 1.8g/10min (200 ℃ / 5kg)
· Rockwell hardness: R-116
· Softening point: 105 ℃
2.2. Environmental characteristics
· Working temperature: - 20 ℃ - 50 ℃
· Storage temperature: - 20 ℃ - 70 ℃
· Drop test: it can withstand the drop from 10 feet (about 3 meters) to the concrete floor
· Waterproof and dustproof: IP68
· Compression capacity: after bearing 10kN axial pressure (uniform pressure), the product has no permanent damage, crack and leakage, and its electronic function has no damage
2.3. Electrical Characteristics
· Maximum placement depth - up to 6.5ft (2.0m)
· Minimum distance from the metal facility to marker - 4in (10cm)
· Global Unique ID code(ID Version): 10 digits
· Compatible locator:
Non ID version: ED8000 or 3M Dynatel EMS Locator
ID version: ED8000
· Frequency (customizable):
Power 169.8khz
Water 145.7 kHz
Sanitary 121.6 kHz
Telecom 101.4 kHz
Gas 83 kHz
Cable TV 77 kHz
General 66.35 kHz
3、Installing The Marker
· Place the marker on nonmetal cable
· Place a minimum of 4 inches (10 cm) of fill dirt over the cable with metal (including shielded cable, Coaxial cable etc.).
· Sand should be used to cover the marker before covering soil. It can give better protection to marker
Payment Terms︰ TT