Product Description

101.4KHZ Telephone Cables EMS Electronic Marker RFID Tag ED2000-101  have two models(ID or Non ID). It consists of a sealed shell containing a passive antenna - a low-frequency resonance circuit tuned to a certain frequency. The ID version integrates an ID chip. Depending on the resonant frequency and the color, the ED2000 are used to mark a wide range of underground facilities, such as telecommunication lines, power supply networks, cable television networks, water supply pipelines, wastewater networks, oil and gas pipelines, and so on.

 

1、APPLICATIONS

ED2000 can be installed at a certain interval, or at the turning of changing trend and at some event points, such as connection points, valves, well covers, T-shaped branches, etc. According to the project importance and project budget, the instralling density can vary from several meters to tens of meters, usually 10-20 meters.

· Pipeline path

· Nonmetallic pipe

· Various valves

· Metering meter

· Various crossing points

· Tee · Depth change

· Pressure reducing device

· Cathodic protection

· Pressure control point

· Embedded reserved port

· Various elbows

· Pipe diameter change

· Water well · Cover

· Maintenance point

……

2、 FEATURES

2.1. Physical Characteristics

· Shell: ABS

· weight:220g±10%

· Case diameter - 8.4in (213mm)

· Case height - 1.2in (3.1cm)

· Melt index: 1.8g/10min (200 ℃ / 5kg)

· Rockwell hardness: R-116

· Softening point: 105 ℃

2.2. Environmental characteristics

· Working temperature: - 20 ℃ - 50 ℃

· Storage temperature: - 20 ℃ - 70 ℃

· Drop test: it can withstand the drop from 10 feet (about 3 meters) to the concrete floor

· Waterproof and dustproof: IP68

· Compression capacity: after bearing 10kN axial pressure (uniform pressure), the product has no permanent damage, crack and leakage, and its electronic function has no damage

2.3. Electrical Characteristics

· Maximum placement depth - up to 6.5ft (2.0m)

· Minimum distance from the metal facility to marker - 4in (10cm)

· Global Unique ID code(ID Version): 10 digits

· Compatible locator:

Non ID version: ED8000 or 3M Dynatel EMS Locator

ID version: ED8000

· Frequency (customizable)：

       Power 169.8khz

Water 145.7 kHz

Sanitary 121.6 kHz

Telecom 101.4 kHz

Gas 83 kHz

           Cable TV 77 kHz

         General 66.35 kHz

4、Installing The Marker

· Place the marker on nonmetal cable

· Place a minimum of 4 inches (10 cm) of fill dirt over the cable with metal (including shielded cable, Coaxial cable etc.).

· Sand should be used to cover the marker before covering soil. It can give better protection to marker

 

Payment Terms︰ TT/Paypay/WU

Product Image